FlickerMarine · Made to measure in Shanghai

Refurbish the canvas and retain what still works

Torn canvas, clear panels that need replacing, or a cover that no longer fits. We first review the item and its fit on board, then discuss partial refurbishment, a remake from the old item or a new custom design.

Assess the issue, then agree the scope

Different conditions call for different approaches

01

Partial refurbishment

Replace a fabric section, clear panel, zipper or local detail. Check the surrounding material and connections first to decide whether a partial replacement is suitable.

02

Remade from your sample

If the existing construction is suitable and its main outline remains usable, we can reference it alongside key dimensions to make a replacement. Distorted or missing areas require separate checks.

03

A revised remake

New equipment, a cover that is too tight or loose, or different access needs may call for a revised pattern based on the current layout.

Prepare your photos

Four sets of photos for the initial assessment

01

Overall fit on the boat

Where possible, photograph the existing item in its normal fitted position, showing the front, rear and both sides.

02

Problem areas

Photograph tears, cracks, tension and excess fabric clearly, with a written note identifying each location.

03

Connection details

Take close-ups of both zipper ends and their connections, fasteners, straps, openings and edging.

04

The complete item off the boat

After removal, lay it out gently and mark its orientation and panel number. Do not force aged material flat for a photograph.

Personal support from our team

From old item to replacement, confirm each step

  1. 01

    Contact us and explain the requirement

    Identify the part, the main problem and what you want to retain or change.

  2. 02

    Initial photo and measurement review

    Use fitted photos to check damage, distortion and existing fastenings, then supply any further measurements needed.

  3. 03

    Confirm whether a sample is needed

    Our team will confirm the receiving address, labeling, accompanying information and return arrangements. Send the item after these details are agreed.

  4. 04

    Agree the scope and quote

    Record the parts to replace, fabrics and components, construction changes, cost and production lead time.

  5. 05

    Confirm before production

    Review the production specification and agreed payment arrangements, then schedule production and ship the finished work as agreed.

  6. 06

    Check the fit and follow up

    On arrival, check the parts, panel numbers and fitting positions. If there is an issue, send overall views and close-ups so we can discuss it.

Prepare the sample

Check these details before shipping

01

Keep orientation and numbering clear

Number each enclosure panel or cover and mark bow/stern, port/starboard and inside/outside. Agree a labeling method first to avoid damaging the original.

02

Prepare the accompanying information

List the parts and quantities being sent, and describe the features to retain or change. Send photos and requirements to our team as well.

03

Confirm packing and returns

Discuss cleaning, drying and folding according to the item's condition. Agree whether the old item will be returned, together with costs and the return address.

Check the connections together

Pay special attention to clear panels and old zippers

Replacing clear window panels

Check not only the clear panel but also the fabric borders, stitching and surrounding connections. One close-up cannot establish that every adjacent material is suitable to retain.

Explore clear enclosures

Replacing zippers

We use all-nylon zippers. Existing and replacement zippers need a compatibility check; both sides may need changing. Appearance alone does not confirm a match.

Before you begin

About refurbishment and remakes

Can you copy the old item exactly?

The old item is an important reference, but we must check for distortion, shrinkage, missing sections or a poor original fit. Review key dimensions and use issues together before deciding which features to retain.

What if I have no photos of it fitted on board?

Send photos of the old item laid out, the current boat and its fastening points. We will identify any missing information and discuss further measurement or pattern work if needed.

Do I need to send every old part?

Not necessarily. Explain how the parts connect, then confirm which samples are needed. Connected enclosure panels may need to be reviewed together.

Can I refurbish some parts now and the rest later?

We can discuss a staged approach, including colors, connection positions and later additions. Materials and availability must be checked again for each batch.

FlickerMarine · Shanghai factory

Tell us what you need.
Let's work through the details.

New covers, replacement canvas or refurbishment:
send us your photos and requirements to discuss a suitable plan.

Both numbers accept calls and can be used to add us on WeChat.

Copy a number and search for it in WeChat under Add Contacts.

WeChat QR codes to be addedFor now, add us by phone number
Phone / WeChat

Products

Details we can discuss

    What to prepare

      Dimensions, fabric, construction and components are confirmed in the final proposal. Specifications and prices are agreed for each project.

      Start your consultation with these details

      New custom canvas inquiry

      Contact our team

      Copy the number, then open WeChat and add a contact.

        Edit this checklist, copy it and send it to our team on WeChat. This page does not submit or save your details.